BK-W5 Stainless Steel Spikes
The spikes are designed for use in the bird proofing industry in particular they should be used to deter pigeons. The product base is made from high quality; ultra violet light-stabilised polycarbonate. The length of each strip is approximately 333mm. Temperature resistance: no loss of mechanical strength at a temperature of 130 degrees centigrade. The protruding spikes are manufactured from 304 grade stainless steel and have a tensile strength of 1600N/mm. The length of each spike is 110mm and has a diameter of approximately 1.3mm, angles and spacing of spikes can be determined from the diagrams below.
Key Features:
• Use up to 50% less
24 protruding wires and 5 different angles make this the widest spike available; no need to use 2 rows of spikes when a single row of our spikes can be used for getting rid of pigeons from ledges with a depth up to 175mm (7 inches) wide.
• Long Life Expectancy
A 3mm thick UV stabilised base and high tensile wires with a diameter of 1.42mm ensures these spikes will be around a lot longer then most other spikes.
• 5 Rows of Wires
Unlike most other spikes available, our spikes have an extra two rows of wires that are cleverly angled outwards making landing impossible from whichever direction the pigeons might approach.
• Easily Snap Into Sections
Along the base of the spike are 8 breakable sections that can be simply snapped apart with your fingers.
Patented Silicone Fixing Holes
Along the base are 16 holes; when the spikes are pressed onto a ledge the silicone oozes through the holes forming rivets that lock the spike firmly to the surface.
If you have been wondering how to get rid of pigeons from wide ledges, our wonderful Steel Bird Spikes are specifically designed for getting rid of pigeons from ledges that have a depth of up to 7 inches (175mm). If your ledge has a depth of more than 7 inches (175mm) then you will require our 7inchs 5spikes bird spike the number attached to